Email:1746098@qq.comTaizhou Huangyan Longer Machinery Mold.,Ltd

Taizhou Huangyan Longer Machinery Mold.,Ltd

Product Categories
Contact Us

Contact:Mr. Mo / Mr. Brian Chen
Mobile: +86-15058816888

Mobile: +86-13806667497
Tel: +86-576-84266060
Fax: +86-576-84254545

Add: Huangtuling, Beicheng, Huangyan District, Taizhou, Zhejiang, China
Postcode: 318020

Basic Information Of Blow Moulding Machine

Blow Molding (Blow moulding) also known as Hollow blow molding, a rapid development of plastic processing methods. A tubular plastic parison obtained by extrusion or injection molding. Hot (or heating to the softening state), placed in the mold, closed die immediately after the compressed air inside the parison, so that plastic parison blown up and close to the mold wall, by cooling demoulding, that is, a variety of hollow products. The manufacturing process of blown film is very similar to that of hollow product, but it does not use mould, from the angle of classification of plastic processing technology, the molding process of blown-plastic film is usually included in extrusion. Blow moulding process during World War II, the production of low-density polyethylene vials was started. In the late 50, with the birth of high-density polyethylene and the development of blow molding machine, blow molding technology has been widely used. The volume of hollow container can reach thousands of liters, and some production has been controlled by computer. Suitable for blow molding plastics have polyethylene, polyvinyl chloride, polypropylene, polyester, etc., the empty containers are widely used as industrial packaging containers.

According to the production method of Parison, blow molding can be divided into extrusion blow molding and injection blow molding, the new development has multi-layer blow molding and stretch blow molding.

Copyright © Taizhou Huangyan Longer Machinery Mold.,Ltd All Rights Reserved.
QR Code